The Inositol Triphosphate (IP3) BioAssay™ ELISA Kit is a competitive inhibition immunoassay for the in vitro quantitative measurement of IP3 in serum, plasma, tissue homogenates, cell lysates, cell culture supernatants and other biological fluids.
Detection Range:123.5-10000pg/ml
Sensitivity:49.3pg/ml
Intra-Assay:CV<10%
Inter-Assay:CV<12%
Kit Components:*366157A: Microtiter Strips, 1x48 wells or 1x96 wells, Pre-coated, ready to use*366157B: Standard, 2x1 vial366157C: Standard Diluent, 1x10ml or 1x20ml*366157D: Detection Reagent A (green), 1x60ul or 1x120ul*366157E: Detection Reagent B (red), 1x60ul or 1x120ul366157F: Assay Diluent A, 1x6ml or 1x12ml366157G: Assay Diluent B, 1x6ml or 1x12ml366157H: TMB Substrate, 1x4.5ml or 1x9ml*366157J: Positive Control, 740.1pg/ml, 1x1vial (Lyophilized)366157K: Stop Solution, 1x3ml or 1x6ml366157L: Wash Buffer, 30X, 1x10ml or 1x20ml
Precaution:The Stop Solution (366157K) suggested for use with this kit is an acid solution. Wear eye, hand, face, and clothing protection when using this material.
Storage and Stability:Store *366157A, *366157B, *366157D, *366157E and *366157J at -20°C. After reconstitution of *366157J, store at 4°C and use within 5 days. Store all the other components at 4°C. Unused kit is stable for 6 months after receipt. Once kit components are opened, it is highly recommended to use remaining reagents within 1 month provided this is within the expiration date of the kit. For maximum recovery of product, centrifuge the original vials after thawing and prior to removing the cap.
Notes on 366157J: Positive Control:Intended Use:The positive control is from a human serum sample known to contain the target protein. It will provide a positive result in the ELISA assay, which indicates that the kit is optimized and working properly.
Characteristics:The positive control vial contains IP3 in human serum (lyophilized powder). Note: The human based serum used in this product are screened for HIV, Hepatitis A, B, C, HTLV and Syphilis.
Expected Values:740.1pg/ml
Usage:Dissolve with 150ul standard diluent and let stand for 10 minutes. If powder is partly insoluble, shake gently until fully dissolved. Mix gently before use. In the experiment, add 50ul to an appropriate well of the plate and test its concentration along with standards and your specimens. Note: Upon receipt store Positive Control vial at -20°C. After reconstitution, store Positive Control vial at 4°C and use within 5 days.
Assay Procedure Summary:1. Prepare all reagents, samples and standards;2. Add 50ul standard or sample to each well
3. Add 50ul prepared Detection Reagent A immediately. Shake and mix. Incubate 1 hour at 37°C
4. Aspirate and wash 3 times
5. Add 100ul prepared Detection Reagent B. Incubate 30 minutes at 37°C
6. Aspirate and wash 5 times
7. Add 90ul Substrate Solution. Incubate 10-20 minutes at 37°C
8. Add 50ul Stop Solution. Read at 450nm immediately.
