85-4610-97　Tissue Factor (TF/F3) BioAssay™ ELISA Kit (Human) 48Tests　359188

特徴

• The Tissue Factor (TF/F3) BioAssay™ ELISA Kit is a quantitative sandwich assay for the detection of TF/F3 in human serum, plasma and other biological fluids. Cell lysates and tissue homogenates, though not tested, may potentially be used as samples.
• Detection Range:7.813-500pg/ml
• Sensitivity:<4.688pg/ml
• Precision: Intra-Assay CV: <8%Inter-Assay CV: <10%
• Assay Principle:This ELISA kit employs the sandwich enzyme-linked immunoassay technique, utilizing a microtiter plate provided in this kit has been pre-coated with an antibody specific to TF/F3. Streptavidin conjugated to Horseradish Peroxidase (HRP) is added to each microplate well and incubated. After TMB substrate solution is added, only those wells that contain TF/F3, Biotin-conjugated antibody and enzyme-conjugated Streptavidin will exhibit a change in color. The enzyme-substrate reaction is terminated by the addition of sulfuric acid solution and the color change is measured spectrophotometrically at a wavelength of 450nm ± 10nm. The concentration of TF/F3 in the sample is then determined by comparing the O.D. of the sample to the standard curve.
• Kit Components:*359188A: Microtiter Strips, 1x96 wells (8x12 wells)
• *359188B: Standard, 2x1 vial359188C: Sample/Standard Dilution Buffer, 1x20ml359188D: Antibody-Biotin (Concentrated), 1x120ul359188E: Antibody Dilution Buffer, 1x10ml359188F: Streptavidin (HRP) (SABC), 1x120ul359188G: SABC Dilution Buffer, 1x10ml359188H: TMB Substrate, 1x10ml359188J: Stop Solution, 1x10ml359188K: Wash Buffer, 25X, 1x30ml
• Storage and Stability:Store unopened *359188A at 4ºC; store at -20ºC once opened. Store unopened *359188B at 4°C; once reconstituted, store at 4°C for up to 12 hours or at -20°C for up to 48 hours. Store other components at 4°C. Kit is stable for 6 months after receipt. For maximum recovery of product, centrifuge the original vials after thawing and prior to removing the cap.
• Assay Summary:1. Wash plate 2 times before adding standards, samples and control (zero) to wells!2. Add 100ul standard or sample to each well and incubate for 90 minutes at 37°C3. Add 100ul Antibody (Biotin) working solution to each well and incubate for 60 minutes at 37°C4. Aspirate and wash 3 times
• 5. Add 100ul SABC working solution to each well. Incubate for 30 minutes at 37°C6. Aspirate and wash 5 times
• 7. Add 90ul TMB substrate. Incubate 15-30 minutes at 37°C8. Add 50ul Stop Solution. Read at 450nm immediately
• 9. Calculate results