This Purinergic Receptor P2Y, G-Protein Coupled 1 (P2RY1) BioAssay™ ELISA Kit is a sandwich enzyme immunoassay for in vitro quantitative measurement of P2RY1 in human tissue homogenates, cell lysates and other biological fluids.
Detection Range:0.156-10ng/ml
Sensitivity:0.057ng/ml
Intra-Assay CV:<10%
Inter-Assay CV:<12%
Kit Components:*153025A: Microtiter Strips, 1x96 wells, Pre-coated, ready to use*153025B: Standard, 2x1 vial153025C: Standard Diluent, 1x20ml*153025D: Detection Reagent A (green), 1x120ul*153025E: Detection Reagent B (red), 1x120ul153025F: Assay Diluent A, 1x12ml153025G: Assay Diluent B, 1x12ml153025H: TMB Substrate, 1x9ml*153025J: Positive Control, 1.87ng/ml, 1x1vial (Lyophilized)153025K: Stop Solution, 1x6ml153025L: Wash Buffer, 30X, 1x20ml
Precaution:The Stop Solution (153025K) included for use in this kit is an acid solution. Wear eye, hand, face, and clothing protection when using this material.
Storage and Stability:Store *153025A, *153025B, *153025D, *153025E and *153025J at -20°C. After reconstitution of *153025J, store at 4°C and use within 5 days. Store all the other components at 4°C. Unused kit is stable for 6 months after receipt. Once kit components are opened, it is highly recommended to use remaining reagents within 1 month provided this is within the expiration date of the kit. For maximum recovery of product, centrifuge the original vials after thawing and prior to removing the cap.
Notes on 153025J: Positive Control:Intended Use:The positive control is from a human cell lysate sample known to contain the target protein. It will provide a positive result in the ELISA assay, which indicates that the kit is optimized and working properly.
Characteristics:The control vials contain human P2RY1 in human cell lysate (lyophilized powder). Note: The human based serum used in this product are screened for HIV, Hepatitis A, B, C, HTLV and Syphilis.
Expected Values:1.87ng/ml
Usage:Dissolve with 150ul standard diluent and let stand for 10 minutes. If powder is partly insoluble, shake gently until fully dissolved. Mix gently before use. In the experiment, add 100ul to an appropriate well of the plate and test its concentration along with standards and your specimens. Note: Upon receipt store Positive Control vial at -20°C. After reconstitution, store Positive Control vial at 4°C and use within 5 days.
Assay Procedure Summary:1. Prepare all reagents, samples and standards
2. Add 100ul standard or sample to each well. Incubate 1 hour at 37°C
3. Aspirate and add 100ul prepared Detection Reagent A. Incubate 1 hour at 37°C
4. Aspirate and wash 3 times
5. Add 100ul prepared Detection Reagent B. Incubate 30 minutes at 37°C
6. Aspirate and wash 5 times
7. Add 90ul Substrate Solution. Incubate 10-20 minutes at 37°C
8. Add 50ul Stop Solution. Read at 450nm immediately.
