The Human C1q And Tumor Necrosis Factor Related Protein 9 (C1QTNF9) ELISA Kit is a sandwich enzyme immunoassay for the in vitro quantitative measurement of C1QTNF9 in human serum, plasma and other biological fluids.
Precaution:The Stop Solution (152352K) suggested for use with this kit is an acid solution. Wear eye, hand, face, and clothing protection when using this material.
Storage and Stability:Store *152352A, *152352B, *152352D and *152352E at -20°C. Store all the other components at 4°C. Unused kit is stable for 6 months. Once kit components are opened, it is highly recommended to use remaining reagents within 1 month provided this is within the expiration date of the kit. For maximum recovery of product, centrifuge the original vials after thawing and prior to removing the cap.
Materials Required But Not Supplied:1. Microplate reader with 450 ± 10nm filter
2. Precision single or multi-channel pipettes and disposable tips
3. Eppendorf Tubes for diluting samples
4. Deionized or distilled water
5. Absorbent paper for blotting the microtiter plate
6. Container for Wash Solution
Sample Preparation and Storage:Serum:Use a serum separator and allow samples to clot for two hours at room temperature or overnight at 4°C before centrifugation for 20 minutes at approximately 1000xg. Assay freshly prepared serum immediately or store samples in aliquots at -20°C or -80°C for later use. Avoid repeated freeze/thaw cycles.
Plasma:Collect plasma using EDTA or heparin as anticoagulant. Centrifuge samples for 15 minutes at 1000xg at 2-8°C within 30 minutes of collection. Remove plasma and assay immediately or store samples in aliquots at -20°C or -80°C for later use. Avoid repeated freeze/thaw cycles.
Note: Serum/plasma samples require about 100-fold dilution (example: 10ul sample + 990ul PBS). Samples should be diluted using 0.01M PBS (pH 7.0-7.2).
Other Biological Fluids:Centrifuge samples for 20 minutes at 1000×g. Remove particulates and assay immediately or store samples in aliquots at -20°C or -80°C. Avoid repeated freeze/thaw cycles.
Note:1. Samples to be used within 5 days may be stored at 4°C, otherwise samples must be stored at -20°C (≤1 month) or -80°C (≤2 months) to avoid loss of bioactivity and contamination
2. Sample hemolysis will influence the results so hemolyzed specimens should not be used
3. When performing the assay, bring samples to RT.
Assay Procedure Summary:1. Prepare all reagents, samples and standards
2. Add 100ul standard or sample to each well. Incubate 2 hours at 37°C
3. Aspirate and add 100ul prepared Detection Reagent A. Incubate 1 hour at 37°C
4. Aspirate and wash 3 times
5. Add 100ul prepared Detection Reagent B. Incubate 30 minutes at 37°C
6. Aspirate and wash 5 times
7. Add 90ul TMB Substrate. Incubate 15-25 minutes at 37°C
8. Add 50ul Stop Solution. Read at 450nm immediately.
