The beta-Lactoglobulin (bLg) BioAssay™ ELISA Kit is a sandwich enzyme immunoassay for the in vitro quantitative measurement of bLG in bovine serum, plasma, tissue homogenates, cell lysates, milk, cell culture supernatants and other biological fluids.
Detection Range:0.156-10ng/ml
Sensitivity:0.067ng/ml
Intra-Assay CV:<10%
Inter-Assay CV:<12%
Kit Components:*023691A: Microtiter Strips, 1x96 wells Pre-coated, ready to use*023691B: Standard, 2x1 vial023691C: Standard Diluent, 20ml*023691D: Detection Reagent A (green), 1x120ul*023691E: Detection Reagent B (red), 1x120ul023691F: Assay Diluent A, 1x12ml023691G: Assay Diluent B, 1x12ml023691H: TMB Substrate, 1x9ml*023691J: Positive Control, Lyophilized, 1.62ng/ml, 1x1vial023691K: Stop Solution, 1x6ml023691L: Wash Buffer, 30X, 1x20ml
Precaution:The Stop Solution (023691K) included for use in this kit is an acid solution. Wear eye, hand, face, and clothing protection when using this material.
Storage and Stability:Store *023691A, *023691B, *023691D, *023691E and *023691J at -20°C. After reconstitution of *023691J, store at 4°C and use within 5 days. Store all the other components at 4°C. Unused kit is stable for 6 months after receipt. Once kit components are opened, it is highly recommended to use remaining reagents within 1 month provided this is within the expiration date of the kit. For maximum recovery of product, centrifuge the original vials after thawing and prior to removing the cap.
Notes on 023691J: Positive Control:Intended Use:The control vials are from a bovine serum sample known to contain Activated Protein C It will provide a positive result in the ELISA assay, which indicates that the kit is optimized and working properly.
Characteristics:The control vial contains mousebLg in bovine serum (lyophilized powder). Note: The mouse source material used in this product is from healthy mouse of SPF standard (specific pathogen-free animals).
Expected Values:1.62ng/ml
Usage:Dissolve with 150ul standard dilutent and let stand for 10 minutes. If powder is partly insoluble, shake gently until fully dissolved. Mix gently before use. In the experiment, add 100ul to an appropriate well of the plate and test its concentmouseion along with standards and your specimens. Note: Upon receipt store Positive Control vial at -20°C. After reconstitution, store Positive Control vial at 4°C and use within 5 days.
Assay Procedure Summary:1. Prepare all reagents, samples and standards
2. Add 100ul standard or sample to each well. Incubate 1 hour at 37°C
3. Aspimousee and add 100ul prepared Detection Reagent A. Incubate 1 hour at 37°C
4. Aspimousee and wash 3 times
5. Add 100ul prepared Detection Reagent B. Incubate 30 minutes at 37°C
6. Aspimousee and wash 5 times
7. Add 90ul TMB Substmousee. Incubate 10-20 minutes at 37°C
8. Add 50ul Stop Solution. Read at 450nm immediately.
