The Human Collagen Type III Alpha 1 (COL3a1) ELISA Kit is a sandwich enzyme immunoassay for the in vitro quantitative measurement of COL3a1 in human serum, plasma, tissue homogenates and other biological fluids.
Detection Range:31.2-2000pg/ml
Sensitivity:11.9pg/ml
Intra-Assay:CV<10%
Inter-Assay:CV<12%
Kit Components:*024277A: Microtiter Strips, 1x48 wells or 1x96 wells, Pre-coated, ready to use*024277B: Standard, 2x1vial024277C: Standard Diluent, 1x10ml or 1x20ml*024277D: Detection Reagent A (green), 1x60ul or 1x120ul*024277E: Detection Reagent B (red), 1x60ul or 1x120ul024277F: Assay Diluent A, 1x6ml or 1x12ml024277G: Assay Diluent B, 1x6ml or 1x12ml024277H: TMB Substrate, 1x4.5ml or 1x9ml*024277J: Positive Control, 175.5pg/ml, 1x1vial024277K: Stop Solution, 1x3ml or 1x6ml024277L: Wash Buffer, 30X, 1x10ml or 1x20ml
Precaution:The Stop Solution (024277K) included for use with this kit is an acid solution. Wear eye, hand, face, and clothing protection when using this material.
Storage and Stability:Store *024277A, *024277B, *024277D, *024277E and *024277J at -20°C. After reconstitution of *024277J, store at 4°C and use within 5 days. Store all the other components at 4°C. Unused kit is stable for 6 months after receipt. Once kit components are opened, it is highly recommended to use remaining reagents within 1 month provided this is within the expiration date of the kit. For maximum recovery of product, centrifuge the original vials after thawing and prior to removing the cap.
Notes on 024277J: Positive Control:Intended Use:The control vial is from a human serum sample known to contain COL3. It will provide a positive result in the ELISA assay, which indicates that the kit is optimized and working properly.
Characteristics:The control vial contains human COL3 in human serum (lyophilized powder). Note: The human based serum used in this product are screened for HIV, Hepatitis A, B, C, HTLV and Syphilis.
Expected Values:175.5pg/ml
Usage:Dissolve with 150ul standard diluent and let it stand for 10 minutes. If powder is partly insoluble, shake gently until fully dissolved. Mix gently before use. In the experiment, add 100ul to an appropriate well of the plate and test its concentration along with standards and your specimens
Note: Upon receipt store Positive Control vial at -20°C. After reconstitution, store Positive Control vial at 4°C and use within 5 days.
Assay Procedure Summary:1. Prepare all reagents, samples and standards
2. Add 100ul standard or sample to each well. Incubate 1 hour at 37°C
3. Aspirate and add 100ul prepared Detection Reagent A. Incubate 1 hour at 37°C
4. Aspirate and wash 3 times
5. Add 100ul prepared Detection Reagent B. Incubate 30 minutes at 37°C
6. Aspirate and wash 5 times
7. Add 90ul Substrate Solution. Incubate 10-20 minutes at 37°C
8. Add 50ul Stop Solution. Read at 450nm immediately.
