The Mucin 5 Subtype AC (MUC5AC) BioAssay™ ELISA Kit is a sandwich enzyme immunoassay for in vitro quantitative measurement of MUC5AC in mouse serum, plasma, tissue homogenates, cell lysates, cell culture supernates and other biological fluids.
Detection Range:0.156-10ng/ml
Sensitivity:0.059ng/ml
Intra-Assay CV:<10%
Inter-Assay CV:<12%
Kit Components:*026904A: Microtiter Strips, 1x96 wells, Pre-coated, ready to use*026904B: Standard, 2x1 vial026904C: Standard Diluent, 1x20ml*026904D: Detection Reagent A (green), 1x120ul*026904E: Detection Reagent B (red), 1x120ul026904F: Assay Diluent A, 1x12ml026904G: Assay Diluent B, 1x12ml026904H: TMB Substrate, 1x9ml*026904J: Positive Control, 1.52ng/ml, 1x1vial (Lyophilized)026904K: Stop Solution, 1x6ml026904L: Wash Buffer, 30X, 1x20ml
Precaution:The Stop Solution (026904K) included for use in this kit is an acid solution. Wear eye, hand, face, and clothing protection when using this material.
Storage and Stability:Store *026904A, *026904B, *026904D, *026904E and *026904J at -20°C. After reconstitution of *026904J, store at 4°C and use within 5 days. Store all the other components at 4°C. Unused kit is stable for 6 months after receipt. Once kit components are opened, it is highly recommended to use remaining reagents within 1 month provided this is within the expiration date of the kit. For maximum recovery of product, centrifuge the original vials after thawing and prior to removing the cap.
Notes on 026904J: Positive Control
Intended Use:The positive control is from a mouse renal tissue homogenates sample known to contain the target protein. It will provide a positive result in the ELISA assay, which indicates that the kit is optimized and working properly.
Characteristics:The positive control vial contains mouse MUC5AC in mouse renal tissue homogenates (lyophilized powder). Note: The mouse source material used in this product are from healthy animal of SPF standard (specific pathogen-free animals).
Expected Values:1.52ng/ml
Usage:Dissolve with 150ul standard diluent and let stand for 10 minutes. If powder is partly insoluble, shake gently until fully dissolved. Mix gently before use. In the experiment, add 100ul to an appropriate well of the plate and test its concentration along with standards and your specimens. Note: Upon receipt store Positive Control vial at -20°C. After reconstitution, store Positive Control vial at 4°C and use within 5 days.
Assay Procedure Summary:1. Prepare all reagents, samples and standards
2. Add 100ul standard or sample to each well. Incubate 1 hour at 37°C
3. Aspirate and add 100ul prepared Detection Reagent A. Incubate 1 hour at 37°C
4. Aspirate and wash 3 times
5. Add 100ul prepared Detection Reagent B. Incubate 30 minutes at 37°C
6. Aspirate and wash 5 times
7. Add 90ul TMB Substrate. Incubate 10-20 minutes at 37°C
8. Add 50ul Stop Solution. Read at 450nm immediately.
