The Human Dipeptidyl Peptidase IV (DPP4) ELISA Kit is a sandwich enzyme immunoassay for the in vitro quantitative measurement of DPP4 in human serum, plasma other biological fluids.
Detection Range:31.2pg/ml - 2,000pg/ml
Sensitivity:14.8pg/ml
Test Principle:The microtiter plate provided in this kit has been pre-coated with an antibody specific to human DPP4. Standards or samples are then added to the appropriate microtiter plate wells with a biotin-conjugated polyclonal antibody preparation specific for human DPP4. Next, Avidin conjugated to Horseradish Peroxidase (HRP) is added to each microplate well and incubated. After TMB substrate solution is added, only those wells that contain DPP4, biotin-conjugated antibody and enzyme-conjugated Avidin will exhibit a change in color. The enzyme-substrate reaction is terminated by the addition of sulfuric acid solution and the color change is measured spectrophotometrically at a wavelength of 450nm ± 10nm. The concentration of DPP4 in the sample is then determined by comparing the O.D. of the sample to the standard curve.
Kit Components:*024686A: Microtiter Plate, 1x96 wells, Pre-coated; ready to use*024686B: Standard, 2x1vial 024686C: Standard Diluent, 1x20ml*024686D: Detection Reagent A, 1x120ul *024686E: Detection Reagent B, 1x120ul 024686F: Assay Diluent A (2x),1x6ml024686G: Assay Diluent B (2x), 1x6ml024686H: TMB Substrate, 1x9ml024686K: Stop Solution, 1x6ml024686L: Wash Buffer, 30X, 1x20ml
Storage and Stability:Store *024686A, *024686B, *024686D and *024686E at -20°C. Store all the other components at 4°C. Unused kit is stable for 6 months. Once kit components are opened, it is highly recommended to use remaining reagents within 1 month provided this is within the expiration date of the kit. For maximum recovery of product, centrifuge the original vials after thawing and prior to removing the cap.
Assay Procedure Summary:1. Prepare all reagents, samples and standards
2. Add 100ul standard or sample to each well. Incubate 2 hours at 37°C
3. Add 100ul prepared Detection Reagent A. Incubate 1 hour at 37°C
4. Aspirate and wash 3 times
5. Add 100ul prepared Detection Reagent B. Incubate 30 minutes at 37°C
6. Aspirate and wash 5 times
7. Add 90ul TMB Substrate. Incubate 15-25 minutes at 37°C
8. Add 50ul Stop Solution. Read at 450nm immediately.
