Constructed of translucent polypropylene reservoirs and column outlets permanently connected to a borosilicate glass barrel, with removable polypropylene caps
20 micron porosity High Density Polyethylene (HDPE) bed supports are fixed in the column outlets
Luer lock inlets and outlets on the columns, along with a wide variety of adapters, valves and fittings, provide simple and versatile tubing connections
All columns are fitted with translucent polypropylene reservoir tops and with bed supports that are permanently mounted in the polypropylene column outlet
Cap, reservoir and column outlet are made of polypropylene. Polypropylene end fittings are not replaceable on FLEXCOLUMNS®.
Maximum pressure is 1.0 bar (14.7 psi, 1.0 atm, 0.1 MPa)
Temperature range is 0 to 50 °C
Sterilize with 2N NaOH or 100% ethanol; autoclaving is not recommended
Available in 30 different sizes with standard inside diameters of 0.7, 1.0, 1.5 and 2.5 cm and lengths ranging from 4 to 170 cm
