It is not compatible with output modules, such as the 4-20mA transmitter
SE30 Flow Control Pulse Transmitter Module
This flow control pulse transmitter module is designed to measure the continuous flow of liquids
The sensor produces a signal which can be transmitted and processed enabling the end user to get a flow measurement
Division is performed by measuring the pulses for the required unit of flow （litres per min.） and then, by the use of four rotary switches on the divider unit （discontinued） - that sit on top of the transmitter to divide signals enabling the output to be tailored to individual requirements
The correct dividing factor can be set up to give the required pulses out for the flow rate
If a fast flow is being monitored and the number of pulse outputs is extremely high the divider unit will bring this down to a more usable level and enable the measurement of any flow rate, regardless of PLC connected
Lower specification flow control transmitter module for use with PLCs PNP or NPN output （use either depending on the PLC type Interfaces via S030 pipework flow adaptor （see stock no
